---

The 20 DVDs consist of over 40 hours of detailed instruction in all aspects of wood boat restoration. The title of the DVD describes the operation I perform but each DVD contains countless tips and tricks I have learned and developed throughout the years. 

You can choose any of the 20 DVDs offered, a combination of DVDs or the entire DVD library. Each 2 hour DVD you purchase will be $20.00. I will offer a package deal for the entire 20 DVD library at a cost of $275.00. I will ship them to you free of charge after I receive your address, see the list of DVDs you want and see that the paypal transfer was made. 

The best way to pay is Paypal if you can. In Paypal you just need my email address which is brandotown@comcast.net. If you cannot use Paypal
I will accept a check but it will take longer to see if the check clears and to ship it, etc.

---

To buy this complete 20 Disc set you can click here:

$275.00

 

---

Free Shipping

 

DVD #1 (129 minutes)

1) Laminated Transom Bow (29 minutes)

2) Building Varnish on Transom (10 minutes)

3) Steam Bending Mahogany Chines (21 minutes)

4) Cutting Keel Landings into Bottom Frames (19 minutes)

5) Fairing Bottom Frames (17 minutes)

6) Cutting Rabbet Joint into Chine (33 minutes)

$20.00 per DVD

 

---

 DVD #2 (120 minutes)

1) Installing Inner Ply to Bottom (20 minutes)

2) Steam Bending Mahogany Garboard Plank (10 minutes)

3) Installing White Oak Intermediates (15 minutes)

4) Building Varnish on Teak Covering Boards (12 minutes)

5) Steam Bending Mahogany Garboard Plank on Boat (11 minutes)

6) Fitting Mahogany Garboard Planks (40 minutes)

7) Cutting and Fitting Dutchman on Chris Craft Hull (12 minutes)

$20.00 per DVD

 

---

 DVD #3 (125 minutes)

1) Resawing Mahogany Plank (14 minutes)

2) Steam Bending Chris Craft Hull Plank (Port Side) (15 minutes)

3) Steam Bending Chris Craft Hull Plank (Stbd Side) (12 minutes)

4) Cutting Tapered Planks (5 minutes)

5) Fairing Chris Craft Capri Transom (16 minutes)

6) Cutting and Gluing Mahogany Bungs (8 minutes)

7) Installing New Covering Boards (33 minutes)

8) Installing New Deck Planks (22 minutes)

$20.00 per DVD

 

---

 DVD #4 (111 minutes)

1) Varnishing Chris Craft (20 minutes)

2) Cutting Curved Deck Seams (11 minutes)

3) Fairing Chris Craft Deck (30 minutes)

4) Applying Sealer over Chris Craft Filler Stain (15 minutes)

5) Bleaching and Applying Blonde Stain to Chris Craft (35 minutes)

$20.00 per DVD

 

---

 DVD #5 (116 minutes)

1) Cannon Carriage Wheels (71 minutes)

2) Steam Bending Mahogany Rub Rail (21 minutes)

3) Removing Varnish with Heat Gun and Scraper (8 minutes)

4) Scraping Deck Seams (8 minutes)

5) Paring Down Mahogany Bungs (14 minutes)

$20.00 per DVD

 

---

 DVD #6 (119 minutes)

1) Removing Mahogany Bungs (9 minutes)

2) Cutting, Fitting and Gluing Mahogany Strips in Hull Seams (15 minutes)

3) Laying Out and Taping Waterline on Chris Craft (27 minutes)

4) Spray Painting Boot Stripe/Waterline (11 minutes)

5) Installing New Spray Rails on Chris Craft (28 minutes)

6) Removing Partial Plank with Router (29 minutes)

$20.00 per DVD

 

---

 DVD #7 (125 minutes)

1) Pulling Sheer Clamp into Place (16 minutes)

2) Sanding "Build Up" Varnish (15 Minutes)

3) Cutting, Fitting and Gluing Scarf Joint (41 minutes)

4) Sealing, Bedding and Installing New Transom Plank (19 minutes)

5) Cutting, Steam Bending and Fitting Hullside Plank (34 minutes)

$20.00 per DVD

 

---

 DVD #8 (102 minutes)

1) Fairing Spray Rails to Receive Stainless Rub Rails (12 minutes)

2) Rounding/Breaking Edges on Irregular Workpiece (9 minutes)

3) Sanding Varnish on Big Radius (6 minutes)

4) Adjusting Yellow Color in Chris Craft Blonde Stain (25 minutes)

5) Re-tightening Fasteners on Chris Craft Hullside Planks (26 minutes)

6) Taping and Preparing Surfaces to be Varnished or Painted (24 minutes)

$20.00 per DVD

 

---

 DVD #9 (146 minutes)

1) Installing Caulk in Deck Seams (146 minutes)

$20.00 per DVD

 

---

DVD #10 (149 minutes)

1) Installing New 3M-5200 Bottom on Chris Craft (149 minutes)

$20.00 per DVD

---

1) Fairing and Finish Sanding New Bottom on Chris Craft (90 minutes)

2) Preparing Gold Leaf Name for Varnish (5 minutes)

3) Sealing Exhaust Pipe Through Transom on Chris Craft (19 minutes)

$20.00 per DVD

 

---

DVD #12 (118 minutes)

1) Cutting and Fitting Hullside Plank with Router (20 minutes)

2) Preparing and Varnishing Teak Swim Platform (43 minutes)

3) Injecting Glue into Repairs (9 minutes)

4) Plugging Old Screw Holes (7 minutes)

5) Sharpening Card Scrapers (12 minutes)

6) Bending Stainless Rub Rail to Fit Spray Rail (24 minutes)

$20.00 per DVD

---

DVD #13 (135 minutes)

1) Cutting, Fitting and Installing Bottom Hullside Planks (135 minutes) 

$20.00 per DVD

---

1) Cutting, Fitting and Installing Chine Caps (63 minutes)

2) Removing Varnish and Finish Sanding Teak Parts (14 minutes)

3) Installing Transom Plank Using Bending Jig (49 minutes)

$20.00 per DVD

---

DVD #15 (144 minutes)

1) Sealing and Painting New Bottom on Chris Craft (73 minutes)

2) Fairing New Planks Down to Existing, Varnished Planks (71 minutes)

$20.00 per DVD

 

---

DVD #16 (142 minutes)

1) Aligning Engine, Shaft, Shaft Log and Strut in Chris Craft (119 minutes)

2) Mixing and Applying Filler Stain to Mahogany (22 minutes)

$20.00 per DVD

 

 

 

$150.00 Special Choose any 10 DVDs for $150.00 To buy this set of 10 Discs you can click here  Then email me at brandotown@comcast.net with your list of 10 DVDs The shipping is free and they will be sent out the following morning

If you would like to buy individual DVD's you can contact me at
brandotown@comcast.net and I can ship them out to you directly.

You can type these titles into youtube or go to my youtube channel, "brandotown", to view an introduction and description of each video. You can call me at 586-713-7065 if you have any questions.
Thank you.
Brandon