Townsend Boatworks LLC Fair Haven Michigan
 
Contact Us 586.725.0648 or 586.713.7065
Classified Ads
Boats for Sale
Engines and Hardware for Sale
Past Projects
Current Projects Photo Gallery
Video Library
Custom Furniture

Dvds for sale


Hello,
I offer 20 different DVDs with approximately 2 hours of instructional material on each. I have listed the 20 DVDs and the videos they contain.
If you would like to get a preview or introduction to any individual video you can go to my youtube channel "Brandotown" where they will be listed.
You can click on it to watch a short clip.

BrandonTown You tube

The 20 DVDs consist of over 40 hours of detailed instruction in all aspects of wood boat restoration. The title of the DVD describes the operation I perform but each DVD contains countless tips and tricks I have learned and developed throughout the years. 

You can choose any of the 20 DVDs offered, a combination of DVDs or the entire DVD library. Each 2 hour DVD you purchase will be $20.00. I will offer a package deal for the entire 20 DVD library at a cost of $275.00. I will ship them to you free of charge after I receive your address, see the list of DVDs you want and see that the paypal transfer was made. 

The best way to pay is Paypal if you can. In Paypal you just need my email address which is brandotown@comcast.net. If you cannot use Paypal
I will accept a check but it will take longer to see if the check clears and to ship it, etc.




To buy this complete 20 Disc set you can click here:

$275.00

 


Free Shipping

Townsend_boatworks_dvds.jpg

 

DVD #1 (129 minutes)

1) Laminated Transom Bow (29 minutes)

2) Building Varnish on Transom (10 minutes)

3) Steam Bending Mahogany Chines (21 minutes)

4) Cutting Keel Landings into Bottom Frames (19 minutes)

5) Fairing Bottom Frames (17 minutes)

6) Cutting Rabbet Joint into Chine (33 minutes)

$20.00 per DVD

 


 DVD #2 (120 minutes)

1) Installing Inner Ply to Bottom (20 minutes)

2) Steam Bending Mahogany Garboard Plank (10 minutes)

3) Installing White Oak Intermediates (15 minutes)

4) Building Varnish on Teak Covering Boards (12 minutes)

5) Steam Bending Mahogany Garboard Plank on Boat (11 minutes)

6) Fitting Mahogany Garboard Planks (40 minutes)

7) Cutting and Fitting Dutchman on Chris Craft Hull (12 minutes)

$20.00 per DVD

 


 DVD #3 (125 minutes)

1) Resawing Mahogany Plank (14 minutes)

2) Steam Bending Chris Craft Hull Plank (Port Side) (15 minutes)

3) Steam Bending Chris Craft Hull Plank (Stbd Side) (12 minutes)

4) Cutting Tapered Planks (5 minutes)

5) Fairing Chris Craft Capri Transom (16 minutes)

6) Cutting and Gluing Mahogany Bungs (8 minutes)

7) Installing New Covering Boards (33 minutes)

8) Installing New Deck Planks (22 minutes)

$20.00 per DVD

 


 DVD #4 (111 minutes)

1) Varnishing Chris Craft (20 minutes)

2) Cutting Curved Deck Seams (11 minutes)

3) Fairing Chris Craft Deck (30 minutes)

4) Applying Sealer over Chris Craft Filler Stain (15 minutes)

5) Bleaching and Applying Blonde Stain to Chris Craft (35 minutes)

$20.00 per DVD

 


 DVD #5 (116 minutes)

1) Cannon Carriage Wheels (71 minutes)

2) Steam Bending Mahogany Rub Rail (21 minutes)

3) Removing Varnish with Heat Gun and Scraper (8 minutes)

4) Scraping Deck Seams (8 minutes)

5) Paring Down Mahogany Bungs (14 minutes)

$20.00 per DVD

 


 DVD #6 (119 minutes)

1) Removing Mahogany Bungs (9 minutes)

2) Cutting, Fitting and Gluing Mahogany Strips in Hull Seams (15 minutes)

3) Laying Out and Taping Waterline on Chris Craft (27 minutes)

4) Spray Painting Boot Stripe/Waterline (11 minutes)

5) Installing New Spray Rails on Chris Craft (28 minutes)

6) Removing Partial Plank with Router (29 minutes)

$20.00 per DVD

 


 DVD #7 (125 minutes)

1) Pulling Sheer Clamp into Place (16 minutes)

2) Sanding "Build Up" Varnish (15 Minutes)

3) Cutting, Fitting and Gluing Scarf Joint (41 minutes)

4) Sealing, Bedding and Installing New Transom Plank (19 minutes)

5) Cutting, Steam Bending and Fitting Hullside Plank (34 minutes)

$20.00 per DVD


 


 DVD #8 (102 minutes)

1) Fairing Spray Rails to Receive Stainless Rub Rails (12 minutes)

2) Rounding/Breaking Edges on Irregular Workpiece (9 minutes)

3) Sanding Varnish on Big Radius (6 minutes)

4) Adjusting Yellow Color in Chris Craft Blonde Stain (25 minutes)

5) Re-tightening Fasteners on Chris Craft Hullside Planks (26 minutes)

6) Taping and Preparing Surfaces to be Varnished or Painted (24 minutes)

$20.00 per DVD

 


 DVD #9 (146 minutes)

1) Installing Caulk in Deck Seams (146 minutes)

$20.00 per DVD

 


DVD #10 (149 minutes)

1) Installing New 3M-5200 Bottom on Chris Craft (149 minutes)

$20.00 per DVD



DVD #11 (114 minutes)

1) Fairing and Finish Sanding New Bottom on Chris Craft (90 minutes)

2) Preparing Gold Leaf Name for Varnish (5 minutes)

3) Sealing Exhaust Pipe Through Transom on Chris Craft (19 minutes)

$20.00 per DVD

 


DVD #12 (118 minutes)

1) Cutting and Fitting Hullside Plank with Router (20 minutes)

2) Preparing and Varnishing Teak Swim Platform (43 minutes)

3) Injecting Glue into Repairs (9 minutes)

4) Plugging Old Screw Holes (7 minutes)

5) Sharpening Card Scrapers (12 minutes)

6) Bending Stainless Rub Rail to Fit Spray Rail (24 minutes)

$20.00 per DVD





DVD #13 (135 minutes)

1) Cutting, Fitting and Installing Bottom Hullside Planks (135 minutes) 

$20.00 per DVD




DVD #14 (126 minutes)

1) Cutting, Fitting and Installing Chine Caps (63 minutes)

2) Removing Varnish and Finish Sanding Teak Parts (14 minutes)

3) Installing Transom Plank Using Bending Jig (49 minutes)

$20.00 per DVD


DVD #15 (144 minutes)

1) Sealing and Painting New Bottom on Chris Craft (73 minutes)

2) Fairing New Planks Down to Existing, Varnished Planks (71 minutes)

$20.00 per DVD

 


DVD #16 (142 minutes)

1) Aligning Engine, Shaft, Shaft Log and Strut in Chris Craft (119 minutes)

2) Mixing and Applying Filler Stain to Mahogany (22 minutes)

$20.00 per DVD

 

 

 

 


1. How to Paint and Varnish a Wooden Boat (2 Disc Set)

Part 1 (149 minutes)
Part 2 (147 Minutes)

$40.00


 

2. How to Fair and Finish Sand a Wooden Boat (143 minutes)

 $20.00 

3. How to Bleach, Stain and Build Varnish on a Wooden Boat (149 minutes)
                                               

$20.00

4. How to Install Bookmatched Double Planked Deck (149 minutes)

$20.00


 

To buy this complete 20 Disc set you can click here: $275.00

 

 

$150.00 Special

Choose any 10 DVDs for $150.00
To buy this set of 10 Discs you can click here

 Then email me at brandotown@comcast.net
with your list of 10 DVDs
The shipping is free and they will be sent out the following morning


If you would like to buy individual DVD's you can contact me at
brandotown@comcast.net and I can ship them out to you directly.

You can type these titles into youtube or go to my youtube channel, "brandotown", to view an introduction and description of each video. You can call me at 586-713-7065 if you have any questions.
Thank you.
Brandon

Boat Working Videos

 

 

 


Townsend Boatworks, LLC P.O. Box 230-012 Fair Haven, MI 48023
                   

 
                                                     
                                                     
 
Web Site by SpiderzWebDesign.com